Gotham steel pans tv promoted cookware – Review

Traditional pans were made of copper and cast iron, of course there were problems with this two materials and as technology advances so are our pans improve. Porcelain enamel is an example of a modern material used in manufacturing the most exquisite pans. It’s applied on pans to create a protective coating against rusting or direct contact of food and metal.

Unlike copper or cast iron, stainless steel does not rust and neither does it have chemical reactions on alkaline or acidic foods. Its cost friendly and definitely worth the cost. One would actually consider it the right material for this purpose. It’s problem on the other side is that it doesn’t conduct heat well. However, an aluminum or copper core is put inside the pan to solve this and ensure heat is conducted evenly. Feel free to find more information at Cooking pots ‘n’ pans.

It’s important to clean your steel pans after use and store it dry. However, some few measures should be observed when cleaning. I.e. you should use hot soapy water and scrub only with nylon scrapers. At all times you should never use metal scrappers since they scratch the steel. On the other hand when you use a dishwasher, the high temperature in the drying process subjects them to formation of water spots.

Glassware is also amazing when it comes to cooking on top of the stove or in the oven. They are costly but on the other hand their practicability justifies it. They’re incapable of conducting heat evenly which often leads to creating hot spots and thus not the popular type of cook ware around.

Restaurant Statistics And Guide

The Role of Timing in Restaurants:

A restaurant needs to have good customer service, or they’ll find themselves with empty tables!

As a restaurant owner or manager, it’s important that staff is fully trained to make sure timing is coordinated. Guests should be able to enjoy each dish (as hopefully they will order an appetizer, main dish, desserts, and after-dinner cocktails or coffee) without feeling rushed or ignored.Have a look at keedys for more info on this.

While timing plays a huge role throughout the entire meal, it often begins before the guests are even seated. It can be hard to forgive a restaurant failing to honor the timing of a reservation, so if the dining room is packed and the promised table isn’t available, try treating guests to a free drink while they wait.

Once guests are seated and food has been served, the timing of clearing the table must also be considered. Guests should be welcome to linger – but should not be forced to wait. The check should be placed on the table with an assurance that there is no hurry and they can stay as long as they’d like. After a nice long evening they may simply be ready to go, but if they’ve found the right place they may never want to leave!

The first impression can mean that guests return – and hopefully become regulars. On the other hand, a poorly-coordinated evening can result in that guests never coming back!

Restaurant Statistics:

-The main goal of managing a restaurant’s revenue is to handle the facility’s capacity and customer demand in a way that maximizes profits/revenue for the restaurant.

-A restaurant MUST have comfortable and adequate seating to ensure a positive experience for all clients.

-Studies have shown that customers will spend more time in the restaurant when seated at a booth, as compared to being seated at a table.

-Customers who sit at booths that are away from a window will spend even more time. Studies show the more natural light people are exposed to, the less time they will spend eating.

-People who sit at a booth will spend an average of $56.67. People who sit at free standing tables will spend an average of $38.92. This means booth seating will net an average of $17.75 more PER PERSON! This is an average of 31% more revenue of booth seating as compared to free standing tables.

-Contrary to popular belief, only 26.16% of independent restaurants fail during the first year of operation (belief is that this statistic is much higher).

-Customers who carry a Chase Freedom® credit card have visited restaurants more frequently in the past two years than they have since the recession began.

Bottom line… studies show that seating style and placement have a huge impact on customers deciding where they will eat… and how much money they will spend! These factors are even more important than the quality of the actual food!

Pop-Out Seating:

A new craze is popping up in San Francisco, New York City, and recently in Westport, Connecticut. Outdoor seating for eateries on busy, narrow streets has been a roadblock for restaurant owners for many years – until now. The solution? Convert parking spaces into a street patio, or “pop-out” seating for the public with tables and chairs. According to an article in West View News written by Benny Benepe, “the pop-up has become an oasis attracting workers and residents alike.” From May to mid October, diners and pedestrians can relax and enjoy life outdoors. During the cold months the seating is stored and the street is restored to available parking spaces.

A couple of years ago in Westport, Connecticut, ten parking spaces were being transformed into outdoor seating. In New York City, the Department of Transportation (DOT) approved applications for twelve of these pop-up cafès. The cafès sit on platforms, creating a level surface between the sidewalks and seating, making the dining area handicap accessible. The number of parking spaces given to the cafès and restaurants is determined by the size of the facility. Two restaurants in New York City collaborated, and together they have a six (6) foot wide by one-hundred-twenty-five (125) foot long platform. Both restaurants were responsible for the construction costs, and since creating the extra outdoor dining space they have noticed a twenty percent increase in their sales. Since no wait service is allowed, the seating is open for public use without any commitment to buy anything from the establishment.

To keep within safety guidelines set by the DOT, the removable platform was raised to street level and a barrier separates the diners and motorists. The restaurants used concrete planters; however they could have also installed security barriers (bollards) or patio fencing. The furniture used to outfit the expanded seating areas is brought inside every evening and must be stored for the winter. Collapsible tables and folding chairs are used to outfit the expanded seating as they are space saving and light weight, making for quick and easy transportation and storage.

Safety is a major concern among diners, so pop-up cafès are generally only located on slow moving one way streets. Each application for the pop-out seating is reviewed on a case by case basis to make sure that emergency routes or access points are not obstructed. Many establishments are protecting their patrons with cement planters filled with colorful flowers or sleek guard fences so diners can use and enjoy the extra seating without worry.

The Elements of Proper Restaurant Service:

-A Prompt and Proper Greeting at the Door – It’s the responsibility of the host to greet guests when necessary. When the host is away from the door, others must stop to let new guests know someone will be right with them.

-A Well Maintained, Clean Working Environment – A clean, well maintained area makes guests feel comfortable and confident that they are in a healthy, professional and caring environment.

-Appearance – When guests see the staff neatly dressed, they automatically relax. Appearance is part of the product; both you and the restaurant will be judged by it.

-Product Knowledge – Every employee at your establishment has to be well versed in everything you offer. Product knowledge increases your confidence and is indispensable in proper service.

-Salesmanship – Good salesmanship enhances the customer’s experience by offering the customer attention.

-Customer Satisfaction – Be sure to check back with a table within three minutes of serving them. When you do check back, stay positive and specific. Try to always catch someone’s eye when walking by the table.

-Teamwork and Communication – If a guest needs something that you can’t get for them, find the person who can. There is no chance for proper service without communication.

-Table Maintenance – Always be aware of what the table looks like; silverware, dirty plates, wipe the table as needed, always cap ashtrays and keep them clean.

-Going Above and Beyond / A Reason to Return – Always be on the lookout for the little things that you can do for your guests to make yourself and your restaurant stand out from the rest! Be thoughtful, creative and extraordinary!

Remember: You sell two things at your restaurant; great service AND a great product!

Restaurant Furniture – Indoor:

Indoor Tables – Commercial grade indoor table collections have something for everyone. Guests will be so comfortable they’ll be ordering seconds! Allow patrons to sit back, relax and enjoy their dining experience without the worry of a wobbly table as the table bases are durable and sturdy.

Indoor Seating – Indoor restaurant chairs and bar stools are classic yet modern, and will perfectly accent any restaurant or cafè. Guests will be thankful as they enjoy the fine dining while relaxing in beautiful seating! A restaurant will truly by the talk of the town with fabulous choices! Choose from wood or metal frames, available with either wood or vinyl seats.

Plymold Booth Seating – Plymold booths are available in a large variety of colors, sizes and materials, making each booth extremely customizable and unique. Booths are available in wood, laminate or upholstered. The wood booths are manufactured from Red Oak wood and are available with optional seat pads. The Contour and Signature laminate booths have a steel frame with a powder coated finish, making it easy to customize – there are 208 laminate finish color options! The upholstered booths are available in 295 different colors!

Restaurant Furniture -Outdoor:

Outdoor Tables – Restaurant tables are available in a large variety of finishes and materials including resin, recycled plastic, aluminum, acrylic fiberglass and molded melamine. Choose a molded melamine table designed to fold for easy storage. Help the planet by pairing a recycled plastic dining table with colorful recycled plastic dining chairs to create a bold and bright atmosphere. Go ahead and buy extra tables to store away for those busy weekends!

Outdoor Seating – With a large collection of bar height and dining height seating available in numerous textures, finishes, colors and materials one will, without a doubt, find the perfect chairs and stools for a restaurant or cafè. Choose from resin, recycled plastic, aluminum, all-weather wicker, strap and sling, Built to withstand the elements and backed by a commercial warranty, one won’t have to worry about storing these commercial grade chairs or stools inside if the weather suddenly changes – simply leave them where they are!

Everlasting Rose- A Summary

Everybody accepts fresh flower through online. Anybody would understand the beauty of flowers especially when it is neatly arranged. These floral plants are not only pleasing to the eyes but they are also magnificent and fragrant. These would serve as a great reminder of the sender’s sentiments. The flower is very precious gift to someone special and it’s very important to any occasion. You can send a beautiful bouquet along with a rousing gift card.

The online florist provide the services to send fresh flower bouquet anywhere in the city. Despite the popularity of dried and artificial flowers, they are only good for displays and not as gifts. Nothing can thrash the beauty, fragrance, and elegance of flowers. These fresh blooms will be more dazzling if you are going to accompany a card with it. Fresh flowers are also expressed your feeling and emotion toward the near and dear one and it’s a great arrangement. Hence, if you would like to say something to someone special to you, you can use flower packages.Checkout Everlasting Rose for more info.

While there are still the traditional methods of sending flowers, getting fresh flowers from these local flower shops may not assurance that you will be able to order the type of arrangement that you want. Usually, the packages from these floral shops came from middlemen. You are not guaranteed that the flowers are fresh because it will be stocked on the shop until a customer will buy it. Aside from that, since you are limited with the choices in a local flower shop, you might end up buying those that are not really that appealing.

The Canadian florist provides the opportunity to send flowers through online and here maximum number of flowers arrangement are available. Aside from that, these flowers came directly from the grower so you are guaranteed that these are fresh. These flowers will last longer since these are freshly preferred.

The full information provide on this website related to flower grow in that season. Aside from that, you’d also be able to get ideas for additional gifts and treats that will match the technique of the flowers. in the Canadian stores has large verities of fresh flowers, birthday gifts, chocolates, candies and small toys available and you should be chose the right type of gift.

Aside from these suggestions, you can also consider adding a small card on the package that you would like to send. Sending a bunch of fresh and neatly arranged flowers may be better but there are instances wherein the recipient would not be able to understand the message that you would like to convey on the flowers. Therefore, if you would like to send a clearer message, you can add a message along with the flower that you will send. The online florist can help you in choosing the right type of card to give along with the flowers that you will be sending through online flowers Canada delivery.

Water Filters Blog – Explained

The earliest recorded method of water filtration dates back to 2000 B.C. where hieroglyphics depict methods of boiling water, placing hot metal instruments in water and filtering water through charcoal and sand. These early methods are thought to have been instituted to make water taste better, thus, cleaning it.learn more here

Water filtration was further developed with the advent of the microscope, which made it possible to see foreign particles and contaminants in water that would have otherwise been considered to be pure and clean. Most notably, the microscope was responsible to identify cholera bacteria in drinking water during a disease outbreak in 19th century London. The outbreak was rampart in all areas except those areas where drinking water was filtered through sand. Chlorine was also discovered to be an effective, chemical disinfectant capable to rid the infectious water of cholera. It was further discovered that the chemical, chlorine, when used in combination with sand filtering, was effective in combating cholera as well the water borne diseases, typhoid and dysentery.

In an effort to achieve drinking water purity, chlorine disinfection and sand filtering became prominent methods of municipal water treatment throughout Europe, and then, the US. These primitive methods of disinfecting and filtering water to achieve purity have been studied and evaluated with the use of technology. Chlorine, despite its history of ridding water of contaminants, is a poison. It has since been found to exhibit side effects that aggravate and induce respiratory complications, such as asthma. The poisonous chemical vaporizes at a faster rate than water, making it dangerously harmful when inhaled, especially during showering. Fluoride has since been added as an additional chemical disinfecting agent, but also has side effects of dental damage and other health complications in young children. Lead and other chemical contaminants and by-products further compromise drinking water during the piping and delivery of treated water.

Business and industry have been instrumental in the disposal of waste materials into our fresh water supply sources. This inhabitation has directly contaminated the water supply and also upset the balance of water flow and creation established by nature. The US Clean Water Act, legislated in 1972, was intended to restore the physical, chemical and biological balance of water that had been disturbed by contamination. The Act specified that all natural water supplies would, at least, be safe for fishing and swimming by 1985. This specification led to the development of some form of water filtration and disinfection in every US city as well as advanced technological innovations in the filtering of water used in industry. Even so, the severity of past and continued damage has left more than 1/3 of all water supplies still polluted with contaminants.

Industrial Safety Equipment

Industrial workers are often exposed to several health risks. It is very important to provide them with the right set of industrial safety equipment so that severe accidents can be avoided. The requirement of such equipment differs between industries but there are a few basic essentials that you should always keep stocked at the workplace appropriately.

-Eye-Protection Gear

Dust and debris made by little alterations at a workplace or major changes being done to renovate a portion pose serious threat to the eyes. That is the reason eye-protection gear holds the foremost importance when it comes to the products bought from industrial supply distributors. Feel free to find more information at read here.

Safety goggles and emergency eye-wash solutions should always be stored in a way that they are easily accessible. Workers should be encouraged never to use chemicals without these protective shields.

-Ear Protection

These are mostly useful in loud environments as excessive exposure to noise can cause serious damage to hearing. Ear muffs that block sound, expandable ear plugs, disposable plugs and dispensers should be made available if the workers are going to work in high-noise conditions.

-Face Shields

There are several options that can be used as an effective protection for the face. Some of these include full face shields with strong glasses for the eyes, dust masks and respirators that can prevent the entry of fine particles and debris into the nose and mouth. These shields also protect the face and respiratory system from harmful chemicals and vapors. Face shields usually come with flexible flaps that can be lifted when not in use.

-Safety Apparel

Disposable apparel, reflective vests for easy visibility and different types of aprons all fall under the category of essential safety apparel.

-First-Aid Kits

It goes without saying that a well stocked first-aid kit needs to be a priority at every workplace. Right from OTC medication for common ailments to bandages and ointments that can help deal with an emergency should all be present in the kit so that proper preparedness for unexpected situations can be maintained at all times.

-Protective Gloves

There are all kinds of gloves available for handling different materials. Chemical and water resistance as well as cut-resistance are just some of the qualities to look for while choosing a pair of safety gloves. They can be reusable as well as of the disposable kind. The choice would depend on what kind of work is mostly expected to be done wearing those gloves.

The Green Ace -An Intro

Marijuana is one of the most controversial topics universally and can bring on a hot debate anytime. The legalization of its use for purposes other than medical has been seen as detrimental to the society and youth by those who vouch for its complete ban.  On the other hand, there is a lobby of people who are pushing for legal allowance for use of marijuana for recreational purposes. The reasons for both differ significantly. But before taking any sides, one must know what marijuana is and why it evokes such strong emotions from the people from the world over? The use of marijuana by humans is known to date back to several centuries. People in ancient times used it as a cure for several ailments. The marijuana or cannabis, as it is also known as, is obtained from hemp plant. The leaves, stem, flowers and other parts of the plant are used to make various types of products. From cosmetics and personal care products to marijuana edibles and special gourmet products, the demand for these infused products is rising steeply and the businesses dealing in these are flourishing rapidly.

The edible products made from marijuana mainly consist of food items infused with it. These also include infused baked items. Cakes, pie, cookies, brownies, chocolates, candies, salty snacks, concentrate weed oil, beverages, infused cooking oils, jams, honey and butter are some of the examples. In the cosmetic products, the soaps, gels, creams and lotions are most in demand. Let us see why there is such a widespread use of these products and the reason that leads to it. The cannabis plant is a naturally occurring plant. The main substance derived from it is THC. THC stands for Tetrahydrocannabinol. This substance is particularly associated with the neurological and psychological effects that it has on people who consume marijuana. It induces drowsiness. It is for these reasons that it is being used to aid in the treatment of various chronic and serious diseases. It is said to reduce the effects of chronic pain from cancer, tumors and ulcers, severe nausea and vomiting from chemotherapy   and various other medical conditions. A point to highlight here is that while we may only debate about its use or ban, the real significance of use of cannabis is understood by those who are sick and cannabis provides the only means of cure and hope. thegreenace is one of the authority sites on this topic.

Mommy Makeover to Get Your Pre-Baby Body Back!

Who says you can’t have kids and have a great body too? For you moms trying to get back into your pre-pregnancy shape after childbirth can feel impossible even after months and months of diet and exercise. The good news is the sacrifices your body has made during pregnancy can be reversed! With a little work and a secret weapon, you amazing mothers can get back into the shape they want and keep it that way.

The secret weapon? A Mommy Makeover.
A Mommy Makeover usually consists of a Tummy Tuck (abdominoplasty), Breast Augmentation or breast lift (mastopexy), and Liposuction. More and more women are choosing to customize their own Mommy Makeover package which can extend to thigh lifts, arm lifts, and face lifts. These procedures can give mothers back their confidence and also give back some of those hard sacrifices they have made. Get the facts about  mommy makeover see this.

Tummy Tuck:
If you’re a mom, you know the exact reality of what happens to your body when pregnant. While your baby grows, your stomach wall, muscles and skin are being stretched beyond their ability to conform to your baby’s needs. No matter how much you’ve exercised, no matter how much you have dieted, your stomach may never get back into that shape you loved before. Mothers choose tummy tucks in order to eliminate and solve stretch marks, belly button deformities and excess loose skin. A Tummy Tuck can be performed under a general anesthetic and on an outpatient basis. They involve the removal of excess skin and fat around the stomach using a lower abdominal incision from hip to hip discreetly below the bikini line. The abdominal muscles are then tightened, any bulge or diastasis that occurs from having children are corrected, and the remaining skin is pulled downward. In most cases, the belly button must also be created or re-positioned. Drains are inserted to assist with healing and are removed 1 to 3 weeks after surgery and follow-up is required to ensure a successful recovery.

Cost: Tummy tucks can range from $6,000 to $10,000 based on specific procedure selection.

Breast Augmentation:
Being a mother, you also know the effects breast feeding can have on your body. If your breasts are sagging more than you would like or if they have completely lost their volume from childbirth and breast feeding, a breast augmentation and/or breast lift may be right for you. The procedure is a short one to two-hour surgery. With a breast augmentation you have the option of a saline- or silicone- filled implants that may or may not need to be replaced after a few years depending on your body and type. Sometimes another method, known as a breast lift or mastopexy, that compliments a breast augmentation is required. During a breast lift, excess skin is removed and breast tissue lifted. Both methods allow the patient to return to their normal activities in one to two weeks.

Vital Information About Culture Codex

A high-performance culture smooths the way to achieving organisational outcomes. And good measurement is the tipping point that smooths the way to creating a high-performance culture. The CEO and senior leaders of any organisation have two high-priority duties, which only they can perform: building culture and setting strategic direction. And these two duties are intrinsically connected in high-performance organisations, organisations that achieve the outcomes they exist to achieve.

In their article “The Leader’s Guide to Corporate Culture”, Groysberg et al discuss that the link between culture and outcomes matters: “When aligned with strategy and leadership, a strong culture drives positive organizational outcomes.” This advice isn’t too hard to accept. The hard part is how to get that alignment between culture and strategy and leadership. A high-performance culture must first align to strategy and leadership. No matter the style of culture that an organisation has, almost certainly the leaders want that culture to be high-performance; they want the culture to smooth the way to those organisational outcomes of reaching goals, fulfilling the mission and realising the vision.

There are four levers to help a culture to shift, suggested by Groysberg’s and fellow authors’ research: “Articulate the aspiration.” Understanding the organisation’s current culture styles, how much it aligns to the organisation’s context, and describing the target culture styles to shift to that will increase the alignment. “Select and develop leaders who align with the target culture.” Training, educating, coaching, mentoring and recruiting leaders who believe in and support the aspiration. Our website provides info on  bullying at work

“Use organizational conversations about culture to underscore the importance of change.” Deliberately and regularly talking about the organisational outcomes that matter and the cultural styles needed to smooth the way to achieve them. “Reinforce the desired change through organizational design.” Using the organisation’s structure, its business process design, performance management systems, training, and so on, to embed attitudes and behaviours of the target culture. The scope of work to implement these four levers feels daunting.
Overwhelming, even.

Possibly to the point of tossing it to the “too hard” basket.

But I think there’s another way.

Measurement can be the tipping point toward a high-performance culture.

In my second book I proffer that good performance measurement is the tipping point toward a high-performance culture. Done well, performance measurement is a process that holds the space for all four of Groysberg and his colleagues’ levers for evolving culture.

Done well, performance measurement holds the space for people at all levels in the organisation to:

Think more deliberately and deeply about the results that matter – good measurement practice starts with conversations that translate weasely, fluffy, vague, high-level goals into clear and concise and easily understood goals.
Have a clearer and unanimous focus on results that matter – when good measurement practice starts with the senior leadership, teams have a starting point they understand, and can more easily see what their contribution is, and therefore what their own goals ought to be.
Focus people on improving processes and not defending turf – good measurement practice focuses measures on process results and not on people’s results, and this takes the judgment away so people can open up to the truth about performance rather than hiding problems for fear of blame.
Get objective feedback that is relevant to the strategy – good measurement practice provides just the right amount of evidence about performance so that decisions are made cleanly (without distraction and argument) and quickly lead to action.
Collaborate across the white space in the organisational chart – good measurement practice encourages a systems view of organisational operations and processes, which is the only way that the root causes that constrain organisational performance can be uncovered and resolved
But, measurement has to be done well to cause the tip toward a high-performance culture.
The ways most organisations do performance measurement won’t work. There are too many bad habits that have become common practice.